D207 Hot Cabi Heater Coil For Towel Warmer Repair

Description

Blue and red insulated wires run through a sticker
backed aluminum foil coil sheet. We take no
responsibility for customers who try it on their own.
Never forget to replace insulation for towel heating
and safety of unit.

1. Unplug the unit,
2. Remove the back screws
3. Carefully remove insulation with gloves on
4. Do Not Discard Insulation!
5. Find blue and red wires and mark clearly which
color goes to which junction.
6. Once this is done remove the old
sticker material carefully to get it in 1 piece.
7. There may be 2 so be careful and check for both
or 1 sticker unit similar to what you see in the photo.
8. Take the new heater coils and fit in place to see if it
indeed, will fit correctly.
9. Then remove and take adhesive backing off new coil.
10. Carefully fix sticker coil inside unit with wires facing to junction
11. Plug junction wires into correct plug already marked before you
disconnected it at the beginning.
12. Check to make sure junction wires are in the correct place before proceeding.
Replace loosely the backing and turn the unit on to test heater. if OK,
13. Turn off unit, unplug and carefully place back insulation in back or sides.
     THIS IS ESSENTIAL AND MUST BE DONE OR YOU COULD START A FIRE
If you do not have the insulation, you can easily get some from a hardware store,
It is the same kind as in refrigerators insulation or even air conditioning thin insulation.
14. Replace screws
15. Plug in and enjoy
Call with questions please.
Toll free 1-888-616-9450
Local 1-630-616- 9450